HPI Nitro Star .15 SS RC10GT

Configuring the speed controller > Châssis FPV Racing
Caisse, sac et valise 2010-02-18 BETA SERIES K HobbyKing Vanquish Brushless V-Hull R/C Boat Parts Mes avoirs PIÈCES MJX
Moteur brushless velineon 3500 assemble + cables 1mm² Rencontrer les cétacés en milieu naturel BAZAR Plus de détails
Quick View {“id”:8674432466,”title”:”BrainFPV RE1″,”handle”:”brainfpv-re1″,”description”:”\u003cp\u003e \u003cstrong\u003eAssembled in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe use only the highest quality components and a 6 layer circuit board for optimal signal integrity. RE1 is designed, assembled and tested using cutting-edge equipment by the best men and women in New England. *Lobster roll not included*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFaster Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest and fastest STM32 F4 processor, running at 180MHz, enables RE1 to run advanced flight control code with ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Sensors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest accelerometers and gyroscopes from Bosch Sensortec running at 1.6kHz give RE1 unparalleled flight performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Racers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eParticipating in a race? We got you covered with RE1’s integrated a multi-protocol (I-Lap, Trackmate) infrared (IR) transponder for lap timing. The transponder ID and protocol can quickly be changed in the field using the OSD menu. Race on!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGraphical OSD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrainFPV RE1 has an integrated full-graphic On-Screen Display (OSD). Having the OSD in the flight controller also saves you from the hassle of using a separate OSD, so you can keep your build clean and simple. Our OSD is fully configurable using the dRonin or Betaflight configuration software and also includes a menu to easily change settings in the field.\u003c\/p\u003e\n\u003cp\u003eThis is not your old character-based OSD, it has advanced features, such as 3D support when used with a 3D camera (e.g. NerdCam3D Mk2) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Lights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe built dedicated hardware to control over 1000 programmable RGB LEDs. Crazy, we know. Use the OSD menu to easily change the LED color when racing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable accessory boards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRE-1-Baro: Barometer add-on for RE1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant to fly an octocopter? RE1 can control up to 8 motors. Want to attach accessories? Connect them using one of the two serial ports or the I2C port. Lost your drone? We added a dedicated buzzer port to help you find your drone when you crash (no worries, we’ve all been there). Sick of using external inverters for FrSky receivers and telemetry? No need for an external inverter here! RE1 has built-in inverters for both. Want more memory? We’ve included 128 Mbit of flash memory for settings and logging. What more could you want? A pony?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen Source\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRE1 runs either the dRonin flight stack or our own fork of \u003cstrong\u003eBetaflight\u003c\/strong\u003e. The firmware does everything, including rendering the OSD. You can use either firmware depending on your personal preference and you can always switch between the two. dRonin has an advanced autotune feature that allows you to easily tune your PID gains for super stable flight and other advanced features, like navigation capabilities. Of course, it is also well suited for racing. Betaflight on the other hand is designed solely for racing and performs very well for that purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Change your VTX Channel \u0026amp; Power thru your OSD!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupport for “SmartAudio”, which allows other devices to configure the video transmitter through the audio cable. This technology is used in the TBS Core Pro OSD and the popular TBS Vendetta racing quadcopter, where the video transmitter channel and transmit power can be changed using the OSD menu.  This feature works with both the TBS Unify Pro 5.8G and the TBS Unify Pro 5.8G HV video transmitters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003cbr\u003e\u003cstrong\u003eIMU:\u003c\/strong\u003e Bosch Sensortec BMI160 running at 1.6kHz (dRonin) or 3.2kHz (Betaflight), connected using SPI.\u003cbr\u003e\u003cstrong\u003eOSD\u003c\/strong\u003e: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. 4 fully customizable pages (dRonin only) and a menu. Support for side-by-side 3D when used with a 3D FPV camera \u003cbr\u003e\u003cstrong\u003eFlash memory:\u003c\/strong\u003e 128Mbit (16MB) high-speed SPI flash memory with up to 0.5MB\/s write\/erase speeds.\u003cbr\u003e\u003cstrong\u003ePWM Outputs:\u003c\/strong\u003e 4 to 8 (8 if 2 serial ports are configured as PWM outputs) with normal PWM and OneShot (OneShot125, OneShot42, MultiShot) support.\u003cbr\u003e\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT. Selectable 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup. \u003cbr\u003e\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, UAV Talk, Light Telemetry. Built-in inverter for FrSKY telemetry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSerial Ports: \u003c\/strong\u003eUp to 4 serial ports (including receiver input) when 4 PWM outputs are used (3 ports with 6 outputs, 2 ports with 8 outputs). Note: Betaflight only supports the 3 serial port \/ 6 PWM output option.  \u003cstrong\u003e\u003cbr\u003eRGB LEDs:\u003c\/strong\u003e Dedicated hardware to control up to 1024 WS2812B RGB LEDs via SPI (up to 32 LEDs in Betaflight). The LED port uses 5V logic for direct compatibility with WS2812B LEDs.\u003cbr\u003e\u003cstrong\u003eIR Emitter:\u003c\/strong\u003e Dedicated hardware for infrared based lap timing with multi-protocol support (I-Lap, Trackmate).\u003cbr\u003e\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers (DC and 4kHz buzzers supported).\u003cbr\u003e\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 3 analog inputs (3.3V max.) for voltage, current, rssi sensing.\u003cbr\u003e\u003cstrong\u003eExtension Port:\u003c\/strong\u003e Hirose DF40 connector with SPI, I2C, serial interfaces, power and GPIO signals.\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 4.5V to 5.5V, 150mA.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36mm x 36mm, 30.5mm hole spacing.\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 grams.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e”,”published_at”:”2017-01-02T14:34:00-06:00″,”created_at”:”2017-01-02T14:45:12-06:00″,”vendor”:”BrainFPV”,”type”:””,”tags”:[“blackfriday”,”fc”,”fcpdb”,”featured”,”fpv”,”mrelectronics”],”price”:6500,”price_min”:6500,”price_max”:6500,”available”:true,”price_varies”:false,”compare_at_price”:7900,”compare_at_price_min”:7900,”compare_at_price_max”:7900,”compare_at_price_varies”:false,”variants”:[{“id”:29010239954,”title”:”Default Title”,”option1″:”Default Title”,”option2″:null,”option3″:null,”sku”:”brainfpv-RE1″,”requires_shipping”:true,”taxable”:true,”featured_image”:null,”available”:true,”name”:”BrainFPV RE1″,”public_title”:null,”options”:[“Default Title”],”price”:6500,”weight”:8,”compare_at_price”:7900,”inventory_quantity”:8,”inventory_management”:”shopify”,”inventory_policy”:”deny”,”barcode”:””}],”images”:[“\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/re1_in_the_box_800_edit.jpg?v=1483389913″,”\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/OSD.png?v=1483389914″,”\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/stack.gif?v=1483389916″,”\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/re1_side_scaled.png?v=1483389918″,”\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/RE1-Diagram.png?v=1483404653″,”\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/LED.png?v=1483405158″],”featured_image”:”\/\/cdn.shopify.com\/s\/files\/1\/0189\/2864\/products\/re1_in_the_box_800_edit.jpg?v=1483389913″,”options”:[“Title”],”content”:”\u003cp\u003e \u003cstrong\u003eAssembled in the USA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe use only the highest quality components and a 6 layer circuit board for optimal signal integrity. RE1 is designed, assembled and tested using cutting-edge equipment by the best men and women in New England. *Lobster roll not included*\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFaster Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest and fastest STM32 F4 processor, running at 180MHz, enables RE1 to run advanced flight control code with ease.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBetter Sensors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe latest accelerometers and gyroscopes from Bosch Sensortec running at 1.6kHz give RE1 unparalleled flight performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for Racers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eParticipating in a race? We got you covered with RE1’s integrated a multi-protocol (I-Lap, Trackmate) infrared (IR) transponder for lap timing. The transponder ID and protocol can quickly be changed in the field using the OSD menu. Race on!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGraphical OSD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrainFPV RE1 has an integrated full-graphic On-Screen Display (OSD). Having the OSD in the flight controller also saves you from the hassle of using a separate OSD, so you can keep your build clean and simple. Our OSD is fully configurable using the dRonin or Betaflight configuration software and also includes a menu to easily change settings in the field.\u003c\/p\u003e\n\u003cp\u003eThis is not your old character-based OSD, it has advanced features, such as 3D support when used with a 3D camera (e.g. NerdCam3D Mk2) \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore Lights\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe built dedicated hardware to control over 1000 programmable RGB LEDs. Crazy, we know. Use the OSD menu to easily change the LED color when racing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable accessory boards:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRE-1-Baro: Barometer add-on for RE1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMore Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWant to fly an octocopter? RE1 can control up to 8 motors. Want to attach accessories? Connect them using one of the two serial ports or the I2C port. Lost your drone? We added a dedicated buzzer port to help you find your drone when you crash (no worries, we’ve all been there). Sick of using external inverters for FrSky receivers and telemetry? No need for an external inverter here! RE1 has built-in inverters for both. Want more memory? We’ve included 128 Mbit of flash memory for settings and logging. What more could you want? A pony?\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOpen Source\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRE1 runs either the dRonin flight stack or our own fork of \u003cstrong\u003eBetaflight\u003c\/strong\u003e. The firmware does everything, including rendering the OSD. You can use either firmware depending on your personal preference and you can always switch between the two. dRonin has an advanced autotune feature that allows you to easily tune your PID gains for super stable flight and other advanced features, like navigation capabilities. Of course, it is also well suited for racing. Betaflight on the other hand is designed solely for racing and performs very well for that purpose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Change your VTX Channel \u0026amp; Power thru your OSD!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSupport for “SmartAudio”, which allows other devices to configure the video transmitter through the audio cable. This technology is used in the TBS Core Pro OSD and the popular TBS Vendetta racing quadcopter, where the video transmitter channel and transmit power can be changed using the OSD menu.  This feature works with both the TBS Unify Pro 5.8G and the TBS Unify Pro 5.8G HV video transmitters.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProcessor:\u003c\/strong\u003e STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.\u003cbr\u003e\u003cstrong\u003eIMU:\u003c\/strong\u003e Bosch Sensortec BMI160 running at 1.6kHz (dRonin) or 3.2kHz (Betaflight), connected using SPI.\u003cbr\u003e\u003cstrong\u003eOSD\u003c\/strong\u003e: Full-graphic, PAL\/NTSC auto detect, adjustable black and white levels. 4 fully customizable pages (dRonin only) and a menu. Support for side-by-side 3D when used with a 3D FPV camera \u003cbr\u003e\u003cstrong\u003eFlash memory:\u003c\/strong\u003e 128Mbit (16MB) high-speed SPI flash memory with up to 0.5MB\/s write\/erase speeds.\u003cbr\u003e\u003cstrong\u003ePWM Outputs:\u003c\/strong\u003e 4 to 8 (8 if 2 serial ports are configured as PWM outputs) with normal PWM and OneShot (OneShot125, OneShot42, MultiShot) support.\u003cbr\u003e\u003cstrong\u003eReceiver Support:\u003c\/strong\u003e PPM, S.Bus (inverter built-in), DSM, HoTT. Selectable 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup. \u003cbr\u003e\u003cstrong\u003eTelemetry Support:\u003c\/strong\u003e FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, UAV Talk, Light Telemetry. Built-in inverter for FrSKY telemetry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSerial Ports: \u003c\/strong\u003eUp to 4 serial ports (including receiver input) when 4 PWM outputs are used (3 ports with 6 outputs, 2 ports with 8 outputs). Note: Betaflight only supports the 3 serial port \/ 6 PWM output option.  \u003cstrong\u003e\u003cbr\u003eRGB LEDs:\u003c\/strong\u003e Dedicated hardware to control up to 1024 WS2812B RGB LEDs via SPI (up to 32 LEDs in Betaflight). The LED port uses 5V logic for direct compatibility with WS2812B LEDs.\u003cbr\u003e\u003cstrong\u003eIR Emitter:\u003c\/strong\u003e Dedicated hardware for infrared based lap timing with multi-protocol support (I-Lap, Trackmate).\u003cbr\u003e\u003cstrong\u003eBuzzer Port:\u003c\/strong\u003e Dedicated port for 5V (100mA max) buzzers (DC and 4kHz buzzers supported).\u003cbr\u003e\u003cstrong\u003eAnalog Inputs:\u003c\/strong\u003e 3 analog inputs (3.3V max.) for voltage, current, rssi sensing.\u003cbr\u003e\u003cstrong\u003eExtension Port:\u003c\/strong\u003e Hirose DF40 connector with SPI, I2C, serial interfaces, power and GPIO signals.\u003cbr\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e 4.5V to 5.5V, 150mA.\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 36mm x 36mm, 30.5mm hole spacing.\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 grams.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e”}
J’accepte 2018-04-17 22:19:48 일 전 SC 70 moteur à quatre temps RC avion
XL830L LCD Digital Voltmeter Ohmmeter Ammeter OHM Multimeter Tester
Walkera Voir les articles KDH Tuning Rotor Team ICON Racing  Team ICON Racing  44126 ICON 550 rotor 13.5mm    May 11, 2011 
Moteur hélicoptère Électros boîte ouverte Defender € 14,07 / pièce Jouets pour bébés et nourrissons FAST mode: 2x more power
Tarot FY650 IRON MAN 650 Quad-Copter Parts Reedy WolfPack LiPo 3400mAh 7.4V 35C with T-plug connector Expérimenté
Emetteur-radio Tuning Rotor King Golden  King Golden  Option Rotor Speed Passion Spec/Modified V4.0, 12.5mmx24.2×7.5 SP001342    March 6, 2015  > Bateaux RC Électrique
2,30 € * $35.69 Google+Facebook Bienvenue Supports de cellulaire pour l’auto Seagate Fuite (légère) au niveau de la… Air Filters & Accessories Red Carpet Modification Service $210.00
Il vous suffit de télécharger la demande d’adhésion et de la retourner à la SCB complétée (datée et signée) en cochant l’option retenue, accompagnée du chèque de règlement libellé à l’ordre de la SCB.
40403 – Rear Exhaust – 2″ Rise Find a Dealer Electronic Speed Controls La culasse est de forme conique, elle a 10 ailettes, sa hauteur est de 50mm, son diamètre est de 55mm dans sa partie supérieur et de 45 à sa base, son poids est de 104gr.
Tacon 2030-15T Brushless Motor 6200KV for 1/16 1/18 Car Trucks MINI-Z READYSET Skip to page navigation
Deli RSS News Feed    Insider’s Newsletter    Become our fan on Facebook    Follow us on Twitter    Tune in on YouTube
https://i.ytimg.com/vi/e0aFZ1ACrsE/hqdefault.jpg

Rc Nitro Engines


Nova Rossi


Picco Engine


Novarossi


Associated Rc HK189 Parts Conditions Générales de Vente
TRAXXAS 6843 COURONNE PRINCIPALE 52DTS (32P) – (M0.8) Slash 4X4 VXL 1/16 (7009) (6) 40403 – Rear Exhaust – 2″ Rise Joachim
Regular Price: $104.10 Maquettes Voitures Cart Check out Voir tout MODELES KYOSHO
Billard Cadre et balancier Costumes 2 Blade Propellers Produit Phare
By Rory 14th August 2017 HARDITO Reprise du RC Lens. Solférino prend les rênes associé à l’Atletico
Lunettes FPV vidéo Drone RC VR Astro Tyres Tout voir PIECES & OPTIONS BATEAUX L’édition du soir Chimie, Plastique, Santé
GRP 1:8 REIFEN I-MAX équipements électriques et fournitures Wraith-Ridgecrest-Jeep Micro – Mini
DRIFT > Traxxas TR4 Scale & Trail 15,000 $ PROPDRIVE Series Gallery View Logiciels de surveillance vidéo
env. 4-6 semaines Receiver 6271 – Full Mod 57cc Twin-X Package (Contact us to order) Find Movie Le Stamped me titille depuis un petit peu, et je pense à l’acquérir dans pas longtemps ! Je veux un Stamped surtout pour faire des wheeling, la vitesse pure m’interesse moins, sans pour autant l’inconsidérer !
RC ELECTRONICS Miele Team Corally – Dynospeed MODX 3.0 – 1/10 Sensored 2-Pole Competition Brushless Motor – Modified – 10.5 Turns – 3450 KV
Novarossi Clutch System Universal offset 1/8 aluminum H plate battery tray
Basher Type de produit None for now. Maybe you guys have some suggestions. Modified 3.5 T Team Epic  Revtech  REV1060 REVTECH    June 27, 2011 
Aller moteur HPI Nitro Star .15 SS RC10GT Moteur Nitro CMB RC

Legal | Sitemap